When you first get your new digital picture frame you need to charge it up using a USB port as well as load your photos on to it.  When you first plug in the picture frame you will have two options, “USB Charge” or “USB Update”

USB Charge Mode – charges the internal battery and will cycle through any existing images on the drive.  It is recommended that you charge the picture frame for at least 4 hours. 

USB Update Mode – us this mode to upload the new images to your digital picture frame.  Instructions on how to do this are included in the next section.

1. Download PhotoViewer Software here.

2. Install Software














3. Plug Digital Frame to PC.

4. Once you plug it in, the digital frame will prompt if you want to "Charge" or "Update." Select "Update".

5. Open PhotoViewer (You will see the pictures are that are currently in the digital frame)




6. Browse to find a picture you would like to upload.




7. Crop Picture and press the blue arrow.




Repeat Step 6-7 to add multiple pictures. Once you've picked all the desired images, continue with steps.

8. Click on "synchronize"




9. And your digital frame has been loaded with all of your images.